(1) For the installation of the base skeleton of the mounting frame, the installation process refers to the construction process of the wooden keel or light steel keel, and the verticality and flatness are repeatedly checked.
(2) The bottom plate of the back plate is nailed, and the second is generally 5-12mm plywood, and the construction method requirements are the same as the construction process of ordinary wooden cover panels. However, when the keel is a light steel keel or angle steel keel, it is necessary to drill the hole with an electric drill first, and then fix the bottom plate on the keel with self-tapping screws, and the screw head cannot be higher than the surface of the bottom plate.
(3) Before the stainless steel plate is installed, it should be processed in the processing plant according to the design size and shape. When there is a bottom plate, apply universal glue to the back of the bottom plate and the stainless steel plate respectively, and paste the pre-processed stainless steel plate on the bottom surface; When there is no base plate, the pre-machined stainless steel plate is fixed to the light steel keel with stainless steel screws or directly welded to the keel.
(4) Edge finishing treatment, in the interface between stainless steel plates or at the yin corner, yang corner, etc. are used to fill sealant, press stainless steel groove strips and other methods of edge decoration treatment.
Stainless steel decorative strips are used more and more with the increasing demand of people, but in the process of specific construction, there are not too few places that should be paid attention to. About the stainless steel decorative strip seam is very common, the seam is treated, the connection is tight, beautiful and generous, but also particularly easy to use, can make the stainless steel decorative strip play a good role for a long time.
