Inlay method
1. Pull out the groove of the size of the decorative strip on the surface of the stone, and the depth is determined according to the need, that is, the size of the decorative strip is higher than the board surface or the inlay size is determined, and the depth of the groove is slightly deeper than the actual size.
2. Apply the marble glue to the stone groove, insert the stainless steel decorative strip into the stone groove, and determine the position and height and the size of each place.
3. After waiting for a few minutes, use a utility knife to scrape off the excess or spilled colloid, and wait for it to dry completely.
Floating sticker method
1. Apply the marble glue directly to the bottom of the decorative strip, determine the size and stick it on the surface of the stone, it is generally recommended to use an angle grinder to polish the paste position first.
2. After waiting for a few minutes, use a utility knife to scrape off the excess or spilled colloid, and wait for it to dry completely.
